Brocade Communications Systems 8 Reference Manual page 322

10
iscsiCxnProtocol 1.3.6.1.2.1.142.1.1.11.1.1.6
iscsiCxnProtocol 1.3.6.1.2.1.142.1.1.11.1.1.6
The transport protocol over which this connection is running. This is hard coded to tcp (6).
iscsiCxnLocalPort 1.3.6.1.2.1.142.1.1.11.1.1.7
The local transport protocol port used by this connection. This object cannot have the value zero,
since it represents an established connection. This is hard coded to 3260
iscsiCxnRemoteAddr 1.3.6.1.2.1.142.1.1.11.1.1.8
The remote Internet Network Address, of the type specified by iscsiCxnAddrType, used by this
connection.
Only IPv4 addresses are supported.
iscsiCxnRemotePort 1.3.6.1.2.1.142.1.1.11.1.1.9
The remote transport protocol port used by this connection. This object cannot have the value zero,
since it represents an established connection.
iscsiCxnMaxRecvDataSegLength 1.3.6.1.2.1.142.1.1.11.1.1.10
The maximum data payload size supported for command or data PDUs able to be received on this
connection.
iscsiCxnMaxXmitDataSegLength 1.3.6.1.2.1.142.1.1.11.1.1.11
The maximum data payload size supported for command or data PDUs able to be sent on this
connection.The value is min(iscsiCxnMaxRecvDataSegLength, iscsiSsnMaxBurstLength)
iscsiCxnHeaderIntegrity 1.3.6.1.2.1.142.1.1.11.1.1.12
This object identifies the iSCSI header digest scheme in use within this connection.
iscsiCxnDataIntegrity 1.3.6.1.2.1.142.1.1.11.1.1.13
This object identifies the iSCSI data digest scheme in use within this connection.
iscsiCxnRecvMarker 1.3.6.1.2.1.142.1.1.11.1.1.14
This object identifies whether or not this connection is receiving markers in its incoming data
stream.
Hard coded to false.
304 Fabric OS MIB Reference
53-1001768-01