End Device Group - Brocade Communications Systems 8 Reference Manual

End Device group

swEndDeviceRlsTable 1.3.6.1.4.1.1588.2.1.1.1.21.1
The table of RLS for individual end devices.
swEndDeviceRlsEntry 1.3.6.1.4.1.1588.2.1.1.1.21.1.1
An entry of an individual end devices' RLS.
Index swEndDevicePort, swEndDeviceAlpa
Since Brocade switches start with port # 0, the SNMP port # should be physical port # plus 1. In
turn, that means that SNMP port # 3 translates to port # 2.
swEndDevicePort 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.1
This object represents the port of the local switch to which the end device is connected. This is an
obsolete entry and does not show any value.
swEndDeviceAlpa 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.2
This object represents the AL_PA of the end device. SNMP AL_PA number should be the logical
AL_PA number plus 1. For example, SNMP AL_PA number 0xf0 translates to 0xef.
This is an obsolete entry and does not show any value.
swEndDevicePortID 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.3
The Fibre Channel port address ID of the entry.
swEndDeviceLinkFailure 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.4
Link failure count for the end device.
swEndDeviceSyncLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.5
Sync loss count for the end device.
swEndDeviceSigLoss 1.3.6.1.4.1.1588.2.1.1.1.21.1.1.6
Sig loss count for the end device.
Fabric OS MIB Reference
53-1001768-01
5
End Device group
195