Brocade Communications Systems 8 Reference Manual page 270

8
connUnitPortSn 1.3.6.1.3.94.1.10.1.12
The FC ID is formatted "DD AA PP" (e.g., "02 00 02"). The Brocade Access Gateway port FC ID
differs from a Fibre Channel switch. A Fibre Channel switch port FC ID has the same DD with a
different AA value for each link. The Brocade Access Gateway "PP" is the port number for F_Ports
and is always zero for N_Ports. Therefore the N_Port FC ID always appears as "DD AA 00" (e.g., "02
00 00"). On a Brocade Access Gateway the FC ID of different ports can have the same "AA" value
but different "DD" values and vice versa.
connUnitPortSn 1.3.6.1.3.94.1.10.1.12
The serial number of the unit (for example, for a GBIC). If this is not applicable, return an empty
string.
If the GBIC has a serial ID, the return value is the GBIC part number; otherwise, the return value is
Null.
connUnitPortRevision 1.3.6.1.3.94.1.10.1.13
The port revision (for example, GBIC).
Return If the GBIC has a serial ID, this returns the GBIC revision number; otherwise, it returns a Null value.
connUnitPortVendor 1.3.6.1.3.94.1.10.1.14
The port vendor (for example, for a GBIC).
Return If the GBIC has a serial ID, this returns the GBIC vendor name; otherwise, it returns a Null value.
connUnitPortSpeed 1.3.6.1.3.94.1.10.1.15
The speed of the port, in kilobytes per second.
For example, the valid values for Brocade 12000, 24000, and 48000 directors: 125,000 KBps,
250,000 KBps, or 500,000 KBps depending on the configuration.
connUnitPortControl 1.3.6.1.3.94.1.10.1.16
Controls the addressed connUnit's port.
Valid commands are:
•
252
resetConnUnitPort
If the addressed connUnit allows this operation to be performed to this port, the addressed
port performs a vendor-specific reset operation.
Examples of these operations are:
•
The Link Reset protocol.
•
The Loop Initialization protocol.
•
Resynchronization occurring between the transceiver in the addressed port to the
transceiver to which the port is connected.
Fabric OS MIB Reference
53-1001768-01