Brocade Communications Systems 8 Reference Manual page 216

5
swBlmPerfAlpa 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.3
swBlmPerfAlpa 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.3
This object identifies the AL_PA values. These values range between x'01' and x'EF' (1 to 239).
AL_PA value x'00' is reserved for FL_Port. If Alpha device is invalid, then it will have -1 value.
swBlmPerfAlpaCRCCnt 1.3.6.1.4.1.1588.2.1.1.1.23.1.1.4
Get CRC count for given AL_PA and port. This monitoring provides information on the number of
CRC errors that occurred on the frames destined to each possible AL_PA attached to a specific
port.
For the Brocade 4100, this value will always be 0. CRC counters are not supported on this platform.
swBlmPerfEEMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.2
End-to-end monitoring counter table.
swBlmPerfEEMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.2.1
End-to-end monitoring counter for given port.
Index swBlmPerfEEPort, swBlmPerfEERefKey
swBlmPerfEEPort 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1
This object identifies the port number of the switch.
swBlmPerfEERefKey 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.2
This object identifies the reference number of the counter. This reference is a number assigned
when a filter is created. In the SNMP Index, start with one instead of 0, add one to the actual
reference key.
swBlmPerfEECRC 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.3
End-to-end CRC error for the frames that matched the SID-DID pair.
swBlmPerfEEFCWRx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.4
Get end-to-end count of Fibre Channel words (FCW) received by the port that matched the SID-DID
pair.
198 Fabric OS MIB Reference
53-1001768-01