Brocade Communications Systems 8 Reference Manual page 189

swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.3
This is the Fibre Channel domain on the other end of the ISL.
This is the domain ID of the remote switch.Valid values are 1 through 239 as defined by FCS-SW.
swNbRemPort 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.4
This is the port index on the other end of the ISL.
The physical port number of the remote switch, plus 1. The valid values for the Brocade 12000,
24000, and 48000 directors are 1 through the maximum number of ports +1.
swNbBaudRate 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.5
The baud rate of the ISL. It is always unknown (0).
Values Possible values are:
•
•
•
•
•
•
•
•
•
The valid values for the Brocade 12000, 24000, and 48000 directors switch are 16 (full) and 32
(double).
The valid value for the Brocade 4100 is 64 (quadruple).
The valid values for the Brocade DCX are double (32), quadruple (64), and octuple (128).
swNbIslState 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.6
The current state of the ISL. The possible values are as follows.
0 - ISL is down.
1 - ISL is initiating and not yet operational.
2, 3, 4, - Used for notification of internal states.
5 - ISL is active.
swNbIslCost 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.7
The current link cost of the ISL. In other words, the cost of a link to control the routing algorithm.
Fabric OS MIB Reference
53-1001768-01
other (1) None of the following.
oneEighth (2) 155 Mbaud.
quarter (4) 266 Mbaud.
half (8) 532 Mbaud.
full (16) 1 Gbaud.
double (32) 2 Gbaud.
quadruple (64) 4 Gbaud.
octuple (128) 8 Gbaud.
decuple (256) 10 Gbaud.
swNbRemDomain 1.3.6.1.4.1.1588.2.1.1.1.2.9.1.3
5
171