Brocade Communications Systems 8 Reference Manual page 281

The high order bit is reserved to indicate whether the object is supported. All objects start at a
value of 0 at hardware initialization and continue incrementing until end of 63 bits and then wrap
to 0.
This is the case for all Class 1 Frames; Brocade does not support them.
connUnitPortStatTable 1.3.6.1.3.94.4.5
A list of statistics for the fabric port types.
connUnitPortStatEntry 1.3.6.1.3.94.4.5.1
An entry describing port statistics.
Index connUnitPortStatUnitId
connUnitPortStatIndex
connUnitPortStatUnitId 1.3.6.1.3.94.4.5.1.1
The connUnitId of the connectivity unit that contains this port statistics table.
connUnitPortStatIndex 1.3.6.1.3.94.4.5.1.2
This object represents the port index.
connUnitPortStatCountError 1.3.6.1.3.94.4.5.1.3
A count of the errors that have occurred on this port.
connUnitPortStatCountTxObjects 1.3.6.1.3.94.4.5.1.4
The number of frames that have been transmitted by this port. A Fibre Channel frame starts with
SOF and ends with EOF. FC loop devices should not count frames passed through. This value
represents the sum total for all other transmitted objects.
connUnitPortStatCountRxObjects 1.3.6.1.3.94.4.5.1.5
The number of frames, packets, IOs, and so forth, that have been received by this port.
A Fibre Channel frame starts with SOF and ends with EOF. FC loop devices should not count frames
passed through. This value represents the sum total for all other received objects.
Fabric OS MIB Reference
53-1001768-01
connUnitPortStatTable 1.3.6.1.3.94.4.5
8
263