Before Loading Mibs; Mib Loading Order - Brocade Communications Systems 8 Reference Manual

1
Loading Brocade MIBs

Before loading MIBs

Before loading Brocade MIB files, ensure that you have the correct version of SNMP for your Fabric
OS version
TABLE 2
Firmware
Fabric OS v5.x
Fabric OS v6.0.0
Fabric OS v6.1.0
Fabric OS v6.2.0
Fabric OS v6.1.2_CEE
Fabric OS v6.3.0
Fabric OS v6.4.0
1.
2.

MIB loading order

Many MIBs use definitions that are defined in other MIBs. These definitions are listed in the
IMPORTS section near the top of the MIB. When loading the Brocade MIBs, refer to
ensure any MIB dependencies are loading in the correct order.
8
(Table 2).
Fabric OS-supported SNMP versions
SNMPv2 is supported from Fabric OS v5.0.4 and higher, but SNMP v2 traps are not supported.
Fabric OS v5.x support SNMPv3-USM MIB (snmpUsmMIB), which is available as RFC 3414.
SNMPv1 SNMPv2
1
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes No
Yes No
SNMPv3
2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Figure 5 to
Fabric OS MIB Reference
53-1001768-01