Supported Hardware And Software - Brocade Communications Systems 8 Reference Manual

•

Supported hardware and software

In those instances in which procedures or parts of procedures documented here apply to some
switches but not to others, this guide identifies exactly which switches are supported and which are
not.
Although many different software and hardware configurations are tested and supported by
Brocade Communications Systems, Inc. for Fabric OS v6.4.0, documenting all possible
configurations and scenarios is beyond the scope of this document.
This document supports Brocade Fabric OS versions v6.4.0 and earlier versions v6.3.0, v6.2.0,
v6.1.2_CEE, v6.1.0, v6.0.0, v5.3.x, v 5.2.x, v5.1.x, v5.0.x, v3.2.x, v3.1.x and all switches supporting
these Fabric OS versions, including:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
xii
Appendix B, "MIB OIDs and their Matching Object Names,"
names and the corresponding MIB Object ID (OID) associated with each.
Brocade 300
Brocade 4100
Brocade 4900
Brocade 5000
Brocade 5100
Brocade 5300
Brocade 5410
Brocade 5424
Brocade 5450
Brocade 5460
Brocade 5470
Brocade 5480
Brocade 7500
Brocade 7500E
Brocade 7600
Brocade 7800 Extension Switch
Brocade 8000 FCoE Switch
Brocade Encryption Switch
Brocade DCX Backbone and Brocade DCX-4S Backbone
-
FA4-18 Fibre Channel application blade
-
FCOE10-24 DCX Blade
-
FS8-18 Encryption Blade
-
FC8-16 port blade
-
FC8-32 port blade
-
FC8-48 port blade
-
FC8-64 port blade (new)
provides a listing of the MIB object
Fabric OS MIB Reference
53-1001768-01