Brocade Communications Systems 8 Reference Manual page 126

3
fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6
fcFxPortBbCreditAvailable 1.3.6.1.3.42.2.1.2.1.1.6
The number of buffers currently available for receiving frames from the attached port in the
buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit.
fcFxPortOperMode 1.3.6.1.3.42.2.1.2.1.1.7
The current operational mode of the Fx_Port.
fcFxPortAdminMode 1.3.6.1.3.42.2.1.2.1.1.8
The desired operational mode of the Fx_Port.
fcFxPortPhysTable 1.3.6.1.3.42.2.1.2.3
A table that contains, one entry for each Fx_Port in the fabric element, physical level status and
parameters of the Fx_Ports.
fcFxPortPhysEntry 1.3.6.1.3.42.2.1.2.3.1
An entry containing physical level status and parameters of an Fx_Port.
Index fcFxPortPhysModuleIndex, fcFxPortPhysFxPortIndex
fcFxPortPhysModuleIndex 1.3.6.1.3.42.2.1.2.3.1.1
Identifies the module containing the Fx_Port for which this entry contains information.
fcFxPortPhysFxPortIndex 1.3.6.1.3.42.2.1.2.3.1.2
Identifies the Fx_Port within the module. This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The value remains constant for the identified
Fx_Port until the module is reinitialized.
fcFxPortPhysAdminStatus 1.3.6.1.3.42.2.1.2.3.1.3
The desired state of the Fx_Port:
•
•
•
108
online (1) Place port online
offline (2) Take port offline
testing (3) Initiate test procedures
Fabric OS MIB Reference
53-1001768-01