Brocade Communications Systems 8 Reference Manual page 259

Values Possible values are:
•
•
•
This could be the only unit with a management card in it for a set of units. A standalone unit should
return "yes" for this object.
Set to 3 (yes).
connUnitPrincipal 1.3.6.1.3.94.1.6.1.13
Indicates whether this connectivity unit is the principal unit within the group of fabric elements. If
this value is not applicable, it returns "unknown."
If the switch is principal, this is set to 3 (yes); otherwise, for a fabric switch it is set to 2 (no). For a
Brocade Access Gateway device, since the switch is behaving as a device management tool and
not a Fibre Channel switch, the value is set to 1 (unknown).
Values Possible values are:
•
•
•
connUnitNumSensors 1.3.6.1.3.94.1.6.1.14
Number of sensors (between 0 and maximum number of sensors) in the connUnitSensorTable.
Refer to
connUnitStatusChangeTime 1.3.6.1.3.94.1.6.1.15
The sysuptime time stamp (in centiseconds) at which the last status change occurred for any
members of the set; this is the latest time stamp that connUnitStatus or connUnitPortStatus
changed.
Not supported.
connUnitConfigurationChangeTime 1.3.6.1.3.94.1.6.1.16
The sysuptime time stamp (in centiseconds) at which the last configuration change occurred for
any members of the set. In other words, this is the latest time stamp of flash memory update. This
represents a union of change information for connUnitConfigurationChangeTime
Not supported.
Fabric OS MIB Reference
53-1001768-01
unknown (1)
no (2)
yes (3)
unknown (1)
no (2)
yes (3)
Table 15 on page 166 for specific sensor counts on the various switches.
connUnitPrincipal 1.3.6.1.3.94.1.6.1.13
8
241