Setting/Cancelling Password Lock <Password - Sanyo VDC-DP9584N - Network Camera Instruction Manual

Setting/Cancelling Password Lock <PASSWORD>
You can lock the access to the main menu by specifying a password. You will be prompted to enter the password to access the
main menu.
1
Select <PASSWORD> and press the SET button.
CAMERA
PRESET POSITION
AUTO MODE
AUTO RETURN
ALARM
·PASSWORD
LANGUAGE
OPTION
PRESET
·PASSWORD
MENU
2
Select <PASSWORD LOCK> and press the SET
button.
PASSWORD
·PASSWORD LOCK
PASSWORD CHANGE
·PASSWORD
LOCK
MENU
RThe password input screen appears.
SET y
1 y
SEQ y
SET
OFF
SET y R
SET y
SET y
SET y
OFF
END
OFF y
SET y SET
R
BACK
3
Enter the password and press the SET button.
When setting a password for the first time, you must enter the
factory default password "1234".
·
RYou will see the "OK" message.
Note: If you enter an incorrect password, you will see the "NG" message. If
you fail to enter the valid password three times successively, the
prompt display will disappear. Start again from the beginning.
4
Press the SET button.
RDisplays <PASSWORD LOCK> – "ON".
• "1234" is a factory default password; it is recommended you
change it to your own password. Advance to step 5.
• If you want to finish the setting, advance to step 8.
For accessing the main menu, see pages 7 – 8.
SET
PASSWORD
R
1234 SET y
x
12