Sanyo VDC-DP9584N - Network Camera Instruction Manual page 12

Naming Cameras <OPTION> – <TITLE>
4
3
Repeat step to complete the name.
• You can enter up to 16 characters.
Example: ROOM1
TITLE SETTING
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789 :-v
·ID ROOM1???????????
RThe letters "???...." do not appear on the monitor screen, but if
you select "ON" for the <TITLE> and then enter no letter at all,
the monitor will show you "???....".
■ If you want the name to be displayed on the monitor in two lines
Select <ID> and enter the line feed mark (v) in the "ID string" wherever you
want to start a new line.
5
Select <POSITION> and press the SET button.
ID ROOM1???????????
·POSITION
PRESET
MENU
·POSITION
ROn the normal monitoring screen, the name will be displayed.
11
x
SET
x
SET y
R
OFF
BACK
6
Determine the location where the name should
be displayed, and then press the SET button.
ROOM1
RReturns to the settings screen.
■ To delete the name specified
Set <PRESET> to "ON", and press the SET button.
R All the characters in the "ID string" will be displayed with "?".
7
Set <MENU> to "END" and press the SET button.
RCloses the settings screen and displays the name on the
normal monitoring screen.
■ If you want to return to the previous screen
Select <MENU> – "BACK" and press the SET button.
MEMO: • If an alarm signal is input when <ALARM SIGN> is "ON" (see page
41), the camera name on the screen will blink during the time set in
<DURATION> (see page 40). When the camera name is not
specified, "???...." will blink.
If <MOTION> is "ON" (see page 38), the camera name on the screen
will also blink when the motion sensor detects movement.
• When <PRIVACY MASK> is "ON" (see page 43), the camera name
will not be displayed.
SET
R