Aone-Push Adjustment (Awc) - Sanyo VDC-DP9584N - Network Camera Instruction Manual

Setting Camera Performance <CAMERA>
A One-Push Adjustment (AWC)
1
Select <AWC LOCK>.
·AWC LOCK
GO TO MWB
·AWC LOCK
2
Point a camera to a white paper or wall to project
an image on the whole screen, and press the SET
button.
RThe cursor "q" lights off, and white balance adjustment will
start. The adjustment will end after about 2 seconds when "q"
lights again.
• If the adjustment does not yield a satisfactory result, press the
SET button again.
19
AWC SETTING
SET
SET y
White paper or wall
SET
■ To perform fine adjustment of color
In the "AWC SETTING" screen, select <GO TO MWB> – "SET", and
press the SET button.
R The "MWB SETTING" screen appears. Specify values manually
(see next page).
MEMO: Transferring to the "MWB SETTING" screen through <GO
TO MWB>, white balance mode (see page 18) will be
changed to "MWB".
3
Select <MENU> – "BACK" and press the SET
button.
RReturns to the camera performance screen.
■ If you want to close the settings screen
Set <MENU> to "END" and press the SET button.