Table of Contents
Advertisement
Setting Camera Performance <CAMERA>
Adjusting DAY/NIGHT Function <DAY/NIGHT> :
The DAY/NIGHT function automatically switches over between COLOR and B/W mode
depending on the ambient brightness. As appropriate for any specific environment, you
can fix the mode to either COLOR or B/W, and adjust the way the switching function works.
1
Select <DAY/NIGHT> and specify a mode.
·DAY/NIGHT
RImage switches immediately after the selection is made.
Note:
During the switching operation, you may hear switch-over noise
inside the camera or see a distorted picture, but these are not signs
of trouble.
2
For advanced settings ("AUTO" or "B/W"), press
the SET button.
REach corresponding settings screen will appear.
• Advances to A on next page when selecting "AUTO".
Advances to B on page 27 when selecting "B/W".
25
For accessing the main menu, see pages 7 – 8.
SYNC
INT
BLC
OFF
IRIS
SET
y
WHITE BALANCE
ATW
AGC GAIN
NORM
GAMMA
0.45
SHUTTER
60
APERTURE
HIGH
·DAY/NIGHT
AUTO y
PRESET
OFF
MENU
BACK
(VDC-DP9584N/VDC-DPN9585P)
■ AUTO: (see next page)
Automatically switches between COLOR and B/W mode
depending on the ambient brightness (DAY/NIGHT function).
■ COLOR
Color image on a steady basis; suitable for always bright
location or conditions.
■ B/W (Black-and-White): (see page 27)
B/W image on a steady basis; suitable when sensitivity is
prioritized.
■ If you want to return to the previous screen
Select <MENU> – "BACK" and press the SET button.
■ If you want to close the settings screen
Set <MENU> to "END" and press the SET button.
Advertisement
Table of Contents
