Adjusting Synchronization Error <Sync - Sanyo VDC-DP9584N - Network Camera Instruction Manual

Setting Camera Performance <CAMERA>
Adjusting Synchronization Error <SYNC>
By default, the synchronization adjustment for the camera is performed internally (INT). However, you must make adjustments
in the L-L- SETTING screen, if the monitor screen seems out of sync after switching over among multiple cameras using AC 24
V. Select a camera as a reference and adjust the others based on the selected one.
Note: The Line-Lock setting is not available for DC 12 V operation.
1
Set <SYNC> to "L-L" and press the SET button.
·SYNC
Lamp
·SYNC L-L
RThe "L-L SETTING" screen appears.
2
Adjust synchronization (0 – 524).
L-L SETTING
<V SYNC PHASE>
·
• Make adjustments so that the vertical synchronization of the
monitor screen does not move up or down.
15
For accessing the main menu, see pages 7 – 8.
L-L y
BLC OFF
IRIS SET y
WHITE BALANCE ATW
AGC GAIN NORM
GAMMA 0.45
R
SHUTTER 60
APERTURE HIGH
DAY/NIGHT AUTO y
PRESET OFF
MENU BACK
250
■ INT
Internally synchronized
• Lamp turned on.
SET
■ L-L (Line-Lock)
Synchronizes the unit with power frequency
• Lamp blinking.
3
Select <MENU> – "BACK" and press the SET
button.
RReturns to the camera performance screen.
■ If you want to close the settings screen
Set <MENU> to "END" and press the SET button.