Table of Contents
Advertisement
Quick Links
INSTRUCTION MANUAL
Color CCD Camera
VDC-DP9584N/VDC-DPN9585P
Please read this manual before installing and using this
camera, and always follow the instructions in it for proper
use. Be sure to keep it handy for later reference.
• Refer to the supplied CD-ROM for the French, Spanish, German and Chinese
"INSTRUCTION MANUAL".
To view the INSTRUCTION MANUAL contained in the supplied CD-ROM, you
need Adobe
®
Reader
®
application. You can download it for installation from the
following web site at Adobe Systems Incorporated.
http://www.adobe.com
• Consultez le CD-ROM fourni pour le « MANUEL D'INSTRUCTIONS » en
français, espagnol, allemand et en chinois.
Pour visualiser le MANUEL D'INSTRUCTIONS contenu dans le CD-ROM
®
fourni, l'application Adobe
Reader
télécharger depuis le site Web suivant d'Adobe Systems Incorporated.
http://www.adobe.com
(Pattern sheet attached)
®
vous est nécessaire. Vous pouvez la
VCC-P9574N/VCC-PN9575P
• Hacer referencia al CD-ROM que se suministra para consultar el "MANUAL DE
INSTRUCCIONES" en francés, español, alemán y chino.
Para ver el MANUAL DE INSTRUCCIONES contenido en el CD-ROM
suministrado, es necesario disponer de la aplicación Adobe
Es posible descargarla para la instalación del siguiente sitio web de Adobe
Systems Incorporated.
http://www.adobe.com
• Die „BEDIENUNGSANLEITUNG" in den Sprachen Französisch, Spanisch,
Deutsch und Chinesisch finden Sie auf der mitgelieferten CD-ROM.
Zum Öffnen der BEDIENUNGSANLEITUNG auf der mitgelieferten CD-ROM
benötigen Sie das Programm Adobe
unter der nachstehend angegebenen Internet-Adresse bei Adobe Systems
Incorporated zur Installation herunterladen:
http://www.adobe.com
• 请参阅随附的光盘以了解法语、西班牙语、德语和中文 "说明手册" 。
要查看随附光盘中包含的说明手册，您需要安装 Adobe
您可以从 Adobe Systems Incorporated 的以下网站下载并进行安装。
http://www.adobe.com
VDC-DP9584N
VDC-DPN9585P
VCC-P9574N
VCC-PN9575P
®
®
Reader
.
®
Reader
®
. Sie können das Programm
应用程序。
®
®
Reader
Advertisement
Table of Contents
Related Manuals for Sanyo VDC-DP9584N - Network Camera
Summary of Contents for Sanyo VDC-DP9584N - Network Camera
- Page 1 INSTRUCTION MANUAL (Pattern sheet attached) VDC-DP9584N VDC-DPN9585P Color CCD Camera VCC-P9574N VCC-PN9575P VDC-DP9584N/VDC-DPN9585P VCC-P9574N/VCC-PN9575P Please read this manual before installing and using this • Hacer referencia al CD-ROM que se suministra para consultar el “MANUAL DE INSTRUCCIONES” en francés, español, alemán y chino. camera, and always follow the instructions in it for proper Para ver el MANUAL DE INSTRUCCIONES contenido en el CD-ROM use.
-
Page 2: Table Of Contents
Contents ☞The contents in angle brackets < > are the menu screen title. Getting Started Settings/Adjustments Precautions ....... Setting Camera Performance <CAMERA>... - Page 3 Contents Returning to Specified Monitoring Mode Flow of Camera Operation through to Network Automatically <AUTO RETURN> ... . . 34 Operation ....... . . 49 Setting Alarm <ALARM>.
-
Page 4: Precautions
Do not open the cabinet, as it may be dangerous and cause damage to the unit. For repairs, consult your dealer or an Authorized Sanyo Service • Dirt can be removed from the cabinet by wiping it with a soft cloth. To Center. -
Page 5: Information
Information Characteristics ■ Supports IEEE802.3af-compliant PoE (Power over Ethernet) power ■ If a hard disk recorder is connected, alarm-triggered images can be supply. recorded according to the alarm output. ■ Equipped with function for bi-directional voice communication ■ If connected to the internet or intranet, monitoring and/or camera between the camera and PC. -
Page 6: Useful Operations
Information Useful Operations ■ Registering multiple preset positions: ■ Limiting main menu access to administrators: R PRESET POSITION (see page 28) R PASSWORD (see page 12) ■ Making the camera move successively along the ■ Hiding image partially for privacy protection: registered preset positions: R OPTION →... -
Page 7: Concerning Control Buttons For Configuration And Adjustment
Concerning Control Buttons for Configuration and Adjustment Using the Camera Control Unit (VAC-70: Separately ordered) Using the Control Buttons on the Circuit Board Camera can be controlled remotely during setting or adjustment. Regarding connection of the monitor, see the separate installation manual. -
Page 8: Accessing The Main Menu
Accessing the Main Menu Access the main menu. Open the advanced settings screen. Main menu When “y” mark displays ·CAMERA PRESET POSITION ·CAMERA AUTO MODE PRESET POSITION AUTO RETURN AUTO MODE ALARM AUTO RETURN PASSWORD Press and hold ALARM LANGUAGE the button for OPTION Press the SET button... - Page 9 Accessing the Main Menu ■ Main menu guide Close the settings screen. Items Settings See page Once the settings are complete, set <MENU> to “END” and press Setting Camera Performance the SET button. (Synchronization, Backlight CAMERA Compensation, Iris Level, White Balance, Gain, Gamma, Shutter ✱...
-
Page 10: Selecting Display Language
Selecting Display Language <LANGUAGE> You can change the language displayed on the settings and adjusting screens. (Default setting: English) LANGUAGE CAMERA PRESET POSITION ·LANGUAGE ENGLISH AUTO MODE LANGUE FRENCH AUTO RETURN IDIOMA SPANISH ALARM PASSWORD ·LANGUAGE OPTION PRESET ·LANGUAGE MENU MENU BACK Select a language and press the SET button. -
Page 11: Naming Cameras
Naming Cameras <OPTION> – <TITLE> You can give a name (title) to each camera. The specified names are displayed on the monitor so that you can easily distinguish the monitoring images when you use multiple cameras. ROOM2 ROOM1 ROOM1 ROOM2 Select <OPTION>... - Page 12 Naming Cameras <OPTION> – <TITLE> Repeat step to complete the name. Determine the location where the name should be displayed, and then press the SET button. • You can enter up to 16 characters. Example: ROOM1 ROOM1 TITLE SETTING ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789 :-v RReturns to the settings screen.
-
Page 13: Setting/Cancelling Password Lock
Setting/Cancelling Password Lock <PASSWORD> You can lock the access to the main menu by specifying a password. You will be prompted to enter the password to access the main menu. Select <PASSWORD> and press the SET button. Enter the password and press the SET button. When setting a password for the first time, you must enter the factory default password “1234”. - Page 14 Setting/Cancelling Password Lock <PASSWORD> Select <PASSWORD CHANGE> and press the Enter a new password (4 numerical values) and SET button. press the SET button. ☞ Write down the new password before you forget it. PASSWORD RYou will see the “OK” message. PASSWORD LOCK ·PASSWORD CHANGE SET y...
-
Page 15: Setting Camera Performance
Setting Camera Performance <CAMERA> Open the screen for setting and adjusting the camera performance. ■ Camera performance screen guide Select <CAMERA> and press the SET button. Items Settings See page SYNC Adjusting Synchronization Error ·CAMERA PRESET POSITION Backlight Compensation AUTO MODE AUTO RETURN IRIS Adjusting Iris Level... -
Page 16: Adjusting Synchronization Error
Setting Camera Performance <CAMERA> Adjusting Synchronization Error <SYNC> By default, the synchronization adjustment for the camera is performed internally (INT). However, you must make adjustments in the L-L- SETTING screen, if the monitor screen seems out of sync after switching over among multiple cameras using AC 24 V. -
Page 17: Backlight Compensation
Setting Camera Performance <CAMERA> Backlight Compensation <BLC> If the images of subjects are not clear because of backlight, compensate for it by adjusting conditions or changing the compensation method. Select <BLC> and specify the compensation ■ CENT (Center zone metering) method. -
Page 18: Adjusting Iris Level
Setting Camera Performance <CAMERA> Adjusting Iris Level <IRIS> If you need to adjust the brightness, follow the steps below. Select <IRIS> and press the SET button. Select <MENU> – “BACK” and press the SET button. SYNC RReturns to the camera performance screen. ·IRIS ■... -
Page 19: Setting White Balance
Setting Camera Performance <CAMERA> Setting White Balance <WHITE BALANCE> With its default Auto-Tracing White Balance (ATW) setting, this unit is able to obtain natural colors even when the light source is changed. However, you may manually change the white balance settings or its mode to obtain better tone, especially when the screen color does not match actual objects. -
Page 20: Aone-Push Adjustment (Awc)
Setting Camera Performance <CAMERA> A One-Push Adjustment (AWC) ■ To perform fine adjustment of color Select <AWC LOCK>. In the “AWC SETTING” screen, select <GO TO MWB> – “SET”, and press the SET button. R The “MWB SETTING” screen appears. Specify values manually AWC SETTING (see next page). -
Page 21: Bmanual White Balance (Mwb)
Setting Camera Performance <CAMERA> B Manual White Balance (MWB) Select <R> or <B> to adjust tint (0 – 255). Select <MENU> – “BACK” and press the SET button. MWB SETTING RReturns to the camera performance screen. ■ If you want to close the settings screen ·... -
Page 22: Setting Gain Value
Setting Camera Performance <CAMERA> Setting Gain Value <AGC GAIN> If you need to adjust the sensitivity in dark places (AGC*), follow the steps below. Select <AGC GAIN> and specify a mode. ■ NORM SYNC Normal setting IRIS WHITE BALANCE ·AGC GAIN NORM ■... -
Page 23: Correcting Gamma Characteristic
Setting Camera Performance <CAMERA> Correcting Gamma Characteristic <GAMMA> Change the mode for Gamma correction*. Select <GAMMA> and specify a mode. ■ 0.45 SYNC γ Gamma value of = 0.45 IRIS WHITE BALANCE AGC GAIN NORM ■ 1 ·GAMMA 0.45 γ SHUTTER Gamma value of APERTURE... -
Page 24: Specifying Shutter Speed
Setting Camera Performance <CAMERA> Specifying Shutter Speed <SHUTTER> You can specify the electronic shutter speed to capture fast-moving subjects. Note: With the increase in shutter speed number, faster movement can be captured, though the image becomes darker. ■ If you want to return to the previous screen Select <SHUTTER>... -
Page 25: Accentuating Subject Outline
Setting Camera Performance <CAMERA> Accentuating Subject Outline <APERTURE> By specifying the APERTURE* setting, you can accentuate the outline of the subject when its image is blurred and unidentifiable. Select <APERTURE> and specify a mode. ■ OFF No accentuating is performed for aperture. SYNC ■... -
Page 26: (Vdc-Dp9584N/Vdc-Dpn9585P)
Setting Camera Performance <CAMERA> Adjusting DAY/NIGHT Function <DAY/NIGHT> : (VDC-DP9584N/VDC-DPN9585P) The DAY/NIGHT function automatically switches over between COLOR and B/W mode depending on the ambient brightness. As appropriate for any specific environment, you can fix the mode to either COLOR or B/W, and adjust the way the switching function works. Select <DAY/NIGHT>... -
Page 27: Aadjusting Automatic Setting (Auto)
Setting Camera Performance <CAMERA> A Adjusting Automatic Setting (AUTO) Select <LEVEL> and specify a level for Select <MENU> – “BACK” and press the SET DAY/NIGHT switching. button. RReturns to the camera performance screen. DAY/NIGHT SETTING ■ If you want to close the settings screen ·LEVEL Set <MENU>... -
Page 28: Badjusting Black-And-White Setting (B/W)
Setting Camera Performance <CAMERA> B Adjusting Black-and-White Setting (B/W) Set <BURST> to “ON” or “OFF” for the burst Select <MENU> – “BACK” and press the SET signal*. button. RReturns to the camera performance screen. DAY/NIGHT SETTING ■ If you want to close the settings screen ·BURST Set <MENU>... -
Page 29: Registering Monitoring Positions
Registering Monitoring Positions <PRESET POSITION> You can register the position information of a camera such as its angle or zoom (maximum 16 positions). You can change the monitoring angle easily as required. Select the <PRESET POSITION> number (No. 1 – Set angle with the Select button and press the 16) to register and press the SET button. - Page 30 Registering Monitoring Positions <PRESET POSITION> ■ To register multiple monitoring positions For showing the PRESET number during to 7. monitoring, set <PRESET ID> to “ON”. Repeat steps from ■ To cancel a registered preset position 1Select the preset position you want to cancel on the main menu PRESET NO.1 and press the SET button.
-
Page 31: Automatic Monitoring
Automatic Monitoring <AUTO MODE> You can make the camera move successively along the registered preset positions or pan automatically during monitoring. Select <AUTO MODE> and specify a mode. ■ SEQ (Sequential Pan) (see next page) CAMERA Sequential panning along the registered preset positions PRESET POSITION ·AUTO MODE ■... -
Page 32: Sequential Panning Along The Registered Preset Positions
Automatic Monitoring <AUTO MODE> Sequential Panning along the Registered Preset Positions <SEQUENTIAL PAN> Note: You need 2 or more positions registered for preset positions (No. 1 - 16). Select <ORDER> and set the panning sequence Select <SPEED> and set the transfer speed between the preset positions. -
Page 33: Automatic Intermittent Panning
Automatic Monitoring <AUTO MODE> Automatic Intermittent Panning <AUTO PAN> Set <POSITION> to “START” and press the SET Set <POSITION> to “END” and press the SET button. button. AUTO PAN AUTO PAN ·POSITION STARTy ·POSITION PAUSE TIME PAUSE TIME SPEED NORM SPEED NORM ·POSITION... - Page 34 Automatic Monitoring <AUTO MODE> Select <RUN> and press the SET button to Select <PAUSE TIME> and set the time to stop at perform an auto pan. the starting position and the end one. AUTO PAN AUTO PAN POSITION STARTy POSITION STARTy ·PAUSE TIME PAUSE TIME...
-
Page 35: Returning To Specified Monitoring Mode Automatically
Returning to Specified Monitoring Mode Automatically <AUTO RETURN> Performing a manual operation on the angle of view (pan, tilt, or zoom) cancels the current monitoring mode (sequential pan, auto pan, preset position). However, you can set the camera to return to the specified monitoring mode automatically once the manual operation is over. -
Page 36: Setting Alarm
Setting Alarm <ALARM> The unit can be connected to an external door switch or infrared sensor (external alarm input: 2 channels). When an alarm is detected, the camera gives notice by automatically moving to the preset position, zooming in on the image or displaying the alarm on the screen. -
Page 37: Specifying Alarm Input
Setting Alarm <ALARM> Specifying Alarm Input <ALARM IN> Set <ALARM IN> to the input channel (1 or 2) and Select <MOVE> and set the camera to move to press the SET button. the channel where the alarm has been detected. If an alarm is detected, the camera moves to the preset position of the same number as the alarm input channel. -
Page 38: Specifying Alarm Output
Setting Alarm <ALARM> Set <ALARM OUT> to “ON” or “OFF” for alarm Specifying Alarm Output <ALARM OUT> output. Select <ALARAM OUT> and specify a polarity for the signal. ALARM IN SETTING POLARITY MOVE ·ALARM OUT ALARM SETTING ALARM IN ·ALARM OUT ·ALARM OUT MOTION uAREA... -
Page 39: Setting Motion Sensor
Setting Alarm <ALARM> Setting Motion Sensor <MOTION> Split the screen into 16 (4 x 4) areas and detect movement. Select <MOTION> and specify “ON”. Move the cursor “yyy” to the area where should not be motion-detected and press the SET button. - Page 40 Setting Alarm <ALARM> Select <uSENSITIVITY> and press the SET Select <TIME> and specify the motion duration button. (1 – 60). ALARM SETTING SENSITIVITY ALARM IN <MOVE> ALARM OUT MOTION uAREA ·uSENSITIVITY <TIME> ·uSENSITIVITY ZOOM · uZOOM TIME ·<TIME> DURATION TEST ALARM SIGN PRESET RThe “SENSITIVITY”...
-
Page 41: Setting Zooming Up At Alarm Detection
Setting Alarm <ALARM> Setting Alarm Duration <DURATION> Setting Zooming Up at Alarm Detection <ZOOM> Select <DURATION> and set the alarm duration. Select <ZOOM> and specify the zoom factor for alarm detection (including motion detection). ALARM SETTING ALARM IN ALARM OUT MOTION uAREA ALARM SETTING... -
Page 42: Setting Alarm Detection Notification
Setting Alarm <ALARM> ■ Once the settings are complete Setting Alarm Detection Notification Set <MENU> to “END” and press the SET button. <ALARM SIGN> R Closes the settings screen and returns to the normal monitoring screen. Select <ALARM SIGN> and specify “ON”. ■... -
Page 43: Configuring Options
Configuring Options <OPTION> In the option configuration, the monitor screen and network configurations can be carried out. ■ OPTION screen guide Select <OPTION> and press the SET button. Items Settings See page TITLE Naming Cameras CAMERA PRESET POSITION PRIVACY MASK Hiding Image Partially AUTO MODE AUTO RETURN... -
Page 44: Hiding Image Partially
Configuring Options <OPTION> Hiding Image Partially <PRIVACY MASK> If privacy protection is required for any shot, apply the masking feature for any position to be prevented from being presented. The maximum number of masks that can be set is 8. Select <OPTION>... - Page 45 Configuring Options <OPTION> Specify the masking size and press the SET Select <MASK SIZE> and set the masking size button. adjustment at pan, tilt, or zoom operation. Sometimes, during pan, tilt, or zoom operation, masked objects become visible or parts that you want to monitor become masked. SIZE Make the following size corrections as necessary.
- Page 46 Configuring Options <OPTION> Set <MENU> to “END” and press the SET button. ■ To preview the entire specified masks RThe specified masks appear on the screen. 1Select <PREVIEW> and press the SET button. ■ If you want to return to the previous screen (Example: 4 maskings) Select <MENU>...
-
Page 47: Configuring The Network Settings
Configuring Options <OPTION> Configuring the Network Settings <NETWORK> Link lamp Configure the settings required for connecting the camera to the network (LAN) in the menu screen. • After you turn on the power, it takes approximately one minute for the “NETWORK” setting menu to appear on the “OPTION”... - Page 48 Configuring Options <OPTION> 2 Select the item to configure, and press the Select Port number setting (c) button. 1 Select <PORT> and press the Select (c) button. If there is no change, advance to step 4. NETWORK SETTING IP ADDRESS SETTING IP ADDRESS FIX y ·...
- Page 49 Configuring Options <OPTION> When not sending alarm signals via network 1 Select <ALARM OUT> and specify “OFF”. NETWORK SETTING IP ADDRESS FIX y PORT 00090 ·ALARM OUT ·ALARM OUT MAC ADDRESS 08-00-7B-81-12-20 Set <MENU> to “END” and press the SET button. RCloses the settings screen and returns to the normal monitoring screen.
-
Page 50: Flow Of Camera Operation Through To Network Operation
Flow of Camera Operation through to Network Operation Perform the following procedures according to the detailed instructions given in the supplied “Manual for Remote Operation by Network Connection”. 1 Accessing the camera Enter your user name and password, and then select a language you want to display on the screen. User name: admin Password: admin 2 Displaying live video from the camera on the main screen... -
Page 51: Flow Of Va-Sw3050Lite Software Operation
Flow of VA-SW3050LITE Software Operation The VA-SW3050LITE software achieves multiple monitoring by using up to 128 cameras and allows frame switchover among several selections including 4-frame and 16-frame views. Perform the following procedures according to the detailed instructions given in the INSTRUCTION MANUAL [VA-SW3050LITE] contained in the supplied CD-ROM. -
Page 52: Screen Sequence
Screen Sequence Main menu ·SYNC ·CAMERA IRIS PRESET POSITION Go to page 52 A WHITE BALANCE AUTO MODE AGC GAIN NORM AUTO RETURN GAMMA 0.45 SHUTTER ALARM APERTURE HIGH PASSWORD DAY/NIGHT AUTO y LANGUAGE OPTION ZOOM PRESET PRESET NO.1 PAN/TILT MENU ·PRESET POSITION PRESET ID... - Page 53 Screen Sequence ·SYNC L-L SETTING OPTION TITLE SETTING IRIS ·TITLE wABCDEFGHIJKLM <V SYNC PHASE> WHITE BALANCE PRIVACY MASK NOPQRSTUVWXYZ NETWORK AGC GAIN NORM · 0123456789 :- GAMMA 0.45 SHUTTER ???????????????? APERTURE HIGH ✱ DAY/NIGHT AUTO y POSITION PRESET PRESET IRIS SETTING MENU BACK MENU...
-
Page 54: Troubleshooting
Troubleshooting Before seeking repair service, please review the following points first. If the trouble persists, consult your dealer or an Authorized Sanyo Service Center. Symptom Items to Be Checked Symptom Items to Be Checked • Is the coaxial cable connected securely? -
Page 55: Pattern Sheet (Vdc-Dp9584N/Vdc-Dpn9585P)
(On the wall) Pattern sheet : mm (inch) (VDC-DP9584N/VDC-DPN9585P) 46.0 (1.9) 88.0 (3.5) ■ Dimensions φ 162.0 (6.4) Scale: 1/1 φ 100.5 (4.0) -
Page 56: (Vcc-P9574N/Vcc-Pn9575P)
Pattern sheet : mm (inch) (VCC-P9574N/VCC-PN9575P) (On the wall) ■ Dimensions φ 150.9 (6.0) 83.4 (3.3) Scale: 1/1 φ 99.8 (4.0) -
Page 57: Specifications
Specifications ■ Camera Model name VDC-DP9584N VCC-P9574N VDC-DPN9585P VCC-PN9575P Scanning system NTSC standard 525 lines, 60 fields/sec. PAL standard 625 lines, 50 fields/sec. Image sensor 1/4" interline transfer method CCD Number of effective pixels 768 (H) x 494 (V) 752(H) x 582(V) Horizontal resolution More than 520 TV lines Auto (Low/High) - Page 58 Specifications Model name VDC-DP9584N VCC-P9574N VDC-DPN9585P VCC-PN9575P Communications Simplified controller (VAC-70: Separately ordered) supported Waterproof Standard IP66 – IP66 – -10°C - +50°C (14°F - 122°F) -10°C - +50°C (14°F - 122°F) -30°C - +50°C (-22°F - 122°F) -30°C - +50°C (-22°F - 122°F) Temperature -10°C - +40°C (14°F - 104°F) -10°C - +40°C (14°F - 104°F)
- Page 59 Specifications ■ Network Model name VDC-DP9584N VCC-P9574N VDC-DPN9585P VCC-PN9575P Image compression JPEG 720 x 240, 640 x 480 (disabled during voice communications), 720 x 286, 640 x 480 (disabled during voice communications), Resolution 360 x 240, 180 x 120 360 x 286, 180 x 143 Picture quality 5 levels Frame rate...
- Page 60 Specifications ■ Copyright notice ■ WEEE Symbol Information This instruction manual is copyrighted by SANYO Electric Co., Ltd. Please note: No materials contained in this manual may be reproduced in any format Your SANYO product is designed and manufactured with without the prior permission of the copyright holder.