Sanyo VDC-DP9584N - Network Camera Instruction Manual page 30

Registering Monitoring Positions <PRESET POSITION>
5
For showing the PRESET number during
monitoring, set <PRESET ID> to "ON".
PRESET POSITION
·PRESET ID
SKIP
·PRESET ID ON
6
For skipping the preset position during
sequential panning, set <SKIP> to "ON".
PRESET POSITION
PRESET ID
·SKIP
·SKIP ON
7
Select <MENU> – "BACK" and press the SET
button.
RReturns to the main menu.
29
PRESET NO.1
ON y
ON
OFF
PRESET NO.1
ON y
ON
ON
■ To register multiple monitoring positions
1 to 7.
Repeat steps from
■ To cancel a registered preset position
1Select the preset position you want to cancel on the main menu
and press the SET button.
2Change <PRESET POSITION> - "ON" to "OFF".
• The registered position information can be restored by returning
the setting to "ON".
• "PRESET NO.1" cannot be turned OFF.
■ To change registered preset position information
1 to 7.
Repeat steps from
■ If you want to close the settings screen
Set <MENU> to "END" and press the SET button.