Setting Gain Value <Agc Gain - Sanyo VDC-DP9584N - Network Camera Instruction Manual

Setting Camera Performance <CAMERA>
Setting Gain Value <AGC GAIN>
If you need to adjust the sensitivity in dark places (AGC*), follow the steps below.
1
Select <AGC GAIN> and specify a mode.
·AGC GAIN
■ If you want to return to the previous screen
Select <MENU> – "BACK" and press the SET button.
■ If you want to close the settings screen
Set <MENU> to "END" and press the SET button.
*AGC (Auto Gain Control) is a function to adjust automatically the
gain of the Video signal from the camera so that an optimum signal
level is obtained according to brightness of the object.
21
For accessing the main menu, see pages 7 – 8.
SYNC INT
BLC OFF
IRIS SET y
WHITE BALANCE ATW
·AGC GAIN NORM
GAMMA 0.45
SHUTTER 60
APERTURE HIGH
DAY/NIGHT AUTO y
PRESET OFF
MENU BACK
■ NORM
Normal setting
■ HIGH (For a dark subject)
Setting with which a bright image is obtained in a lower
illuminance than the NORM setting.
• This setting causes noise generation and a grainy image.
■ OFF
Fixed gain setting