Setting Alarm <Alarm - Sanyo VDC-DP9584N - Network Camera Instruction Manual

Setting Alarm <ALARM>
The unit can be connected to an external door switch or infrared sensor (external alarm input: 2 channels). When an alarm is
detected, the camera gives notice by automatically moving to the preset position, zooming in on the image or displaying the
alarm on the screen. Furthermore, it has a built-in motion sensor, which outputs alarm signals when any moving subject, such
as a would be intruder, is detected.
If you connect external buzzers and/or lamps, alarm signals will also be output to them at alarm detection for you to have
audible and/or visual notifications.
1
Select <ALARM> and press the SET button.
CAMERA
PRESET POSITION
AUTO MODE
AUTO RETURN
·ALARM
PASSWORD
LANGUAGE
OPTION
·ALARM
PRESET
MENU
RThe "ALARM SETTING" screen appears.
ALARM SETTING
·ALARM IN
ALARM OUT
MOTION
uAREA
uSENSITIVITY
ZOOM
uZOOM TIME
DURATION
ALARM SIGN
PRESET
MENU
35
For accessing the main menu, see pages 7 – 8.
SET y
1 y
SEQ y
SET
OFF
SET y
R
SET y
SET y
SET y
OFF
END
1 y
NO
OFF
SET y
SET y
OFF
5S
5S
OFF
OFF
BACK
■ Alarm setting guide
Items
ALARM IN Specifying Alarm Input
ALARM OUT Specifying Alarm Output
MOTION Setting Motion Sensor
Setting Zooming Up at Alarm
ZOOM
Detection
DURATION Setting Alarm Duration
ALARM SIGN Setting Alarm Detection Notification
■ If you want to return to the previous screen
Select <MENU> – "BACK" and press the SET button.
■ If you want to close the settings screen
Set <MENU> to "END" and press the SET button.
Settings See page
36
37
38
40
40
41