Using The Scanner; Turning On The Scanner - Kodak I810 - Scanner Firmware - PC User Manual

2

Using the Scanner

Turning on the scanner

A-61169 January 2005
This chapter provides the following operational procedures:
Turning on the scanner
Document preparation
Adjusting the input tray, side guides and output tray
Scanning documents
Feeding long documents
Continuous and manual feeding
Other functions, such as calibration, using the programmable keys, using
multi-feed detection, setting the elevator level, etc. can be performed
using the Operator Control Panel. See Chapter 3, Operator Control Panel
Functions for procedures.
To turn on the scanner:
Toggle the power switch to the On position.
When the menu bar is displayed on the Operator Control Panel, the
scanner is Ready.
IMPORTANT: Always power-up the scanner to its Ready state before
powering-up the host computer.
On/Off switch
2-1