Performing A Self-Test Or Extended Self-Test; Running In Count-Only Mode - Kodak I810 - Scanner Firmware - PC User Manual

Performing a self-test or
extended self-test
Running in count-only
mode
3-6
You can perform a self-test or an extended self-test on the scanner. The
self-test is the same test performed when the scanner is powered-up; the
extended self-test is a more thorough test.
To perform a self-test or extended self-test:
1. Select the Diagnostics Settings menu
2. Use the right or left arrow to navigate to the Diagnostics function.
3. Use the down arrow to select Run self-test or Run extended self-
test.
Exit Diagnostics
Run self-test
Run extended self-test
Run count only
Run print test
4. Select Return. The scanner will run the self-test and report the
results on the display.
You may want to count the number of documents entering the scanner
without actually scanning.
To run in count-only mode:
1. Select the Diagnostics Settings menu
2. Use the right or left arrow to navigate to the Diagnostics function.
3. Use the down arrow to select Run count only.
Exit Diagnostics
Run self-test
Run extended self-test
Run count only
Run Print test
4. Place the documents in the elevator tray.
5. Select Return. The message Counting Pages will be displayed.
6. Press Start/Resume. The page count will be displayed.
icon.
Settings
icon.
Settings
A-61169 January 2005