Kodak I80 Quick Tips

REPLACING THE PAPER FEED ROLLER*
1. Open the ADF cover.
2. Lift the tabs and remove the paper feed roller cover.
3. Remove the paper feed roller.
4. Insert the new paper feed roller by aligning the tabs into
the slots and pressing the roller into place.
5. Reinsert the paper feed roller cover and snap it into
place.
6. Close the ADF cover.
* Not available on the Kodak i80 Scanner.
REPLACING THE FEED MODULE
1. Open the ADF cover.
2. To remove the feed module, squeeze the plastic
clamps that hold the feed module in place and pull the
feed module out of position.
3. Reinstall the new feed module by pushing it into
position aligning the feed module into the slots until it
snaps into place.
4. Close the ADF cover.
K NUMBER, SERIAL NUMBER AND DATA-
PLATE LOCATION
The K Number, Serial Number and Dataplate can be found
on the bottom of the scanner.
To access the dataplate:
Carefully tilt the scanner back until you can see the
•
dataplate on the bottom of the scanner.
Dataplate Serial number
SUPPLIES*
CAT No. Description
162 3362 Kodak Feed Module / for i50/i55/i60/i65/
i80 Scanners (qty 4)
853 5981 Kodak Digital Science Roller Cleaning
Pads (qty 24)
896 5519 Staticide Wipes for Kodak Scanners
(qty 144)
* Items are subject to change.
EASTMAN KODAK COMPANY
Document Imaging
Rochester, New York 14650
Kodak and Digital Science are trademarks of Eastman Kodak Company.
© Eastman Kodak Company, 2005
A-61534
Kodak i55/i65/i80 Scanners
Quick Tips
www.kodak.com
Kodak Service
1-800-822-1414
Kodak Parts Services
1-800-471-0803
1-585-724-6042
Kodak Professional Services
1-800-525-6325

Customer Service

(for consumables)
1-888-247-1234