Ricoh Aficio SP W2470 Software Manual page 47

K
Enter the printer's IPv4 address in the [Name or address of server providing lpd]
box.
L
Enter "lp" in the [Name of printer or print queue on that server] box, and then click
[OK].
The port is added.
M
Check that the port of the selected printer is displayed in [Port:].
N
Configure the default printer as necessary.
O
Click [Finish].
The printer driver installation starts.
P
After the installation is completed, select one of the options to restart the
computer either now or later, and then click [Finish].
Restart the computer to complete installation.
Note
❒ Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe" on the CD-ROM root directory.
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
❒ A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer].
Reference
p.50 "Having Problems Installing the Printer Driver from the CD-ROM".
Using the LPR Port
33
1