Ricoh Aficio SP W2470 Software Manual page 265

Parameter
eap
{tls|ttls|leap|peap
} {chap|msc-
hap|mschapv2|pap|md
5|tls}
username "charac-
ter string"
username2 "charac-
ter string"
domain "character
string"
password "charac-
ter string"
srvcert {on | off}
imca {on | off}
srvid "character
string"
Note
❒ You can use this command only when the IEEE 802.11b interface unit is in-
stalled.
Value configured
You can specify the EAP authentication type.
tls: EAP-TLS (default)
ttls: EAP-TTLS
leap: LEAP
peap: PEAP
chap, mschap, mschapv2, pap, md5, or tls are settings for
the phase 2 method, and must be set when using EAP-
TTLS or PEAP.
Do not make these settings when using other EAP au-
thentication types.
If you select EAP-TTLS, you can select chap, mschap,
mschapv2, pap, or md5.
If you select PEAP, you can select mschapv2 or tls.
You can specify the login user name for the Radius server.
Usable characters: ASCII 0x20-0x7e(31 bytes) other than
"@". The default is blank.
You can specify the phase 2 username for EAP-
TTLS/PEAP phase 2 authentication.
Usable characters: ASCII 0x20-0x7e (31 bytes) other than
"@". The default is blank.
You can specify the login domain name for the Radius
server.
Usable characters: ASCII0x20-0x7e (31 bytes) other than
"@". The default is blank.
You can specify the login password for the Radius server.
Usable characters: ASCII 0x20-0x7e(128 bytes). The de-
fault is blank.
You can set the server certificate. The default is "off".
You can enable or disable the certificate when the inter-
mediate certificate authority is present. The default is
"off".
You can set the server ID and subdomain of the certificate
server.
Remote Maintenance by telnet
6
251