Using a Printer Server
Using NetWare
This section describes the setting procedure for network printers in the NetWare
environment. In the NetWare environment, you can connect the printer as a
"print server" or "remote printer".
Important
❒ IPv6 cannot be used on this function.
❖ Setting procedure
• When using the printer as a print server
A
Installing SmartDeviceMonitor for Admin.
B
Setting the network interface board.
C
Turning the printer off and then back on.
• When using the printer as a remote printer
A
Installing SmartDeviceMonitor for Admin.
B
Setting the network interface board.
C
Setting NetWare.
D
Starting the print server.
Note
7
❒ This procedure assumes an environment is already prepared for normal
NetWare running the printing service setting.
❒ The procedure is explained with the following example settings:
• File server's name ...CAREE
• Print server's name ...PSERV
• Printer's name ...R-PRN
• Queue name ...R-QUEUE
278