Using Usb Interface - Ricoh Aficio SP W2470 Software Manual

Using USB Interface

Follow the procedure below to setup USB connection.
Important
❒ USB2.0 can be used only with Mac OS X 10.3.3 or higher.
A
Start Printer Setup Utility.
B
Click [Add].
❖ Mac OS X 10.4 or later
Click a printer that has "USB" indicated in the "Connection" column.
❖ Other Mac OS X
Click [USB] on the pop-up menu.
The connected printer appears.
C
Select the printer, and then select its manufacturer from the [Printer Model:]
pop-up menu.
Under Mac OS X 10.4 or later, you are using from the [Print Using] pop-up
menu.
A list of printer types appears.
D
Select the connected printer from the list of printer models, and then click
[Add].
E
Quit Printer Setup Utility.
Note
❒ When printing with a USB connection to a Macintosh computer, printer
language does not change automatically. Use the control panel on this
printer to change printer language to [Auto] or [PS] before printing.
❒ USB2.0 can be used only with Mac OS X 10.3.3 or higher.
Mac OS X
9
305