Ricoh Aficio SP W2470 Software Manual page 162

Making Printer Settings Using the Control Panel
❖ Security Type
Select whether to enable or disable encryption. When encryption is en-
abled, specify the security type.
• Off
• WEP
• Hex: Enter the WEP key using a hexadecimal number sequence.
When using 64 bit WEP, enter 10 ASCII characters. When using 128
bit WEP, enter 26 ASCII characters.
• ASCII: Enter the WEP key using an ASCII character sequence. When
using 64 bit WEP, enter 5 ASCII characters. When using 128 bit WEP,
enter 13 ASCII characters.
• WPA
Encryption Method
4
• TKIP
• CCMP(AES)
Authentication Method
• WPA-PSK: From 8 to 63 ASCII characters can be entered.
• WPA : When selecting this method, obtain a certificate using Web
Image Monitor.
• WPA2-PSK: Same as WPA-PSK, 8 to 63 ASCII characters can be en-
tered.
• WPA2: A supplemental specification of WPA. Fully compatible with
IEEE802.11i.
Note
❒ Default: Off
❒ The WEP key can also be set using Web Image Monitor. For details, see
Web Image Monitor Help.
❖ Wireless LAN Signal
You can check the signal strength when using wireless LAN.
❖ Communication Speed
You can select the transmission speed for IEEE 802.11b.
• Auto
• 11Mbps Fixed
• 5.5Mbps Fixed
• 2Mbps Fixed
• 1Mbps Fixed
Note
❒ Default: Auto
❖ Restore Defaults
Reset the wireless LAN to default.
148