Ricoh Aficio SP W2470 Software Manual page 134

Making Printer Settings Using the Control Panel
❖ Auto Tray Select
You can select whether to assign each tray to automatically print the paper
size and type set by printer driver.
Note
❒ Default : On
❒ When using custom size paper, if automatic tray selection is enabled, the
size selected on the control panel has priority. If this setting is disabled, the
size selected from the printer driver has priority.
❒ Only installed trays appear on the display panel.
❒ You can select multiple trays.
❒ If you need to have a tray locked, you must select the tray using both printer
driver and control panel.
4
❖ Tray Priority
You can set a tray to be checked first when automatic tray selection is enabled
from the printer driver. The tray selected here is used when no tray is selected
for a print job.
Note
❒ Default : Tray 1
❒ Only installed trays appear on the display panel.
❒ It is recommended that you load paper of the size and orientation you use
most frequently in the tray selected in this setting.
Note
❒ JIS stands for "Japanese Industrial Standard".
120