Printable Gl/2 Files; Hp-Gl Specifications - Ricoh Aficio SP W2470 Software Manual

Printable GL/2 Files

HP-GL Specifications

The GL/2 and TIFF filter modules that are included in GL/2 and TIFF filter
products emulate the HP-GL commands of HP7550A. However, the command
syntax differs (as shown below) according to the settings of the GL/2 and TIFF
modules.
HP-GL command syntax
The syntax of HP-GL commands is as follows: a section containing two alpha-
betical characters, a parameter section (certain commands only), and a termina-
tor section.
If you specify multiple parameters at the end, a separator must be inserted be-
tween each parameter.
The HP-GL/2 filter can use the separators and terminators shown below.
Syntax Elements
Separator
Terminator
Integer parameter
Real number parameter
Plotter setup commands
The HP-GL/2 filter does not support the following plotter setup command and
will ignore it if it is included:
Command
GM
Commands for plotting Circles, Ovals, and Multiple Shapes
The HP-GL/2 filter does not support the following Circles/Ovals/Multiple
Shapes plotting commands and will ignore them if they are included:
Command
UF
PT
Format and Range
comma or space
; or LF or another command
999999999 to 999999999
999999999. 999999999 to
Changes buffer sizes, but not the size of the input or output
buffer.
Specifies the fill pattern at parallel interval.
Specifies the overprint interval.
Printable GL/2 Files
999999999.999999999
Description
Description
5
169