If Bidirectional Communication Is Disabled - Ricoh Aficio SP W2470 Software Manual

If Bidirectional Communication is Disabled

Configure the option settings as follows when bidirectional communication is
disabled.
Important
❒ Under Windows 2000/XP and Windows Server 2003/2003 R2, Manage Print-
ers permission is required to change the printer properties in the [Printers]
folder. Log on as an Administrators or Power Users group member to acquire
this permission.
❒ Under Windows NT 4.0, Full Control permission is required to change the
printer properties in the [Printers] folder. Log on as an Administrators or Power
Users group member to acquire this permission.
A
On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
B
Click the icon of the printer you want to use.
C
On the [File] menu, click [Properties].
D
Click the [Change Accessories] tab.
If the options in the [Change Accessories] tab are disabled, bidirectional con-
nection is enabled. If this is the case, you do not need to make any changes to
the option settings.
If you are using the RPCS printer driver, click the [Change Accessories] tab.
If you are using the PostScript 3 printer driver, click the [Device Settings] tab.
E
In the Option area, select the options that are installed, and then make the
necessary settings.
If you are using the RPCS printer driver: in the [Select printer options:] box, se-
lect the options that are installed.
If you are using the PostScript 3 printer driver: in the [Installable Options] box,
change the status of the options that are installed.
F
In [Total memory:], select the total amount of memory, when the optional
SDRAM module is added.
G
Click the icon of the installed printer, then select [Printing Preferences...] on
the [File] menu.
H
Under [Paper source tray settings:], click and highlight the tray to be used, and
then select the appropriate size, position, and type for the tray. Select the
[Do not use Auto Tray Select] check box to exclude the tray from automatic tray
selection.
I
Click [OK] to close the printer properties dialog box.
Making Option Settings for the Printer
1
53