Ricoh Aficio SP W2470 Software Manual page 225

D
In the menu area, click [Configuration].
E
Click [E-mail] in "Device Settings".
F
Make the following settings:
• Items in the Reception column: Make the necessary settings for sending
and receiving e-mail.
• Items in the SMTP column: Configure the SMTP server. Check your mail-
ing environment, and then specify the necessary items. You can also per-
form mail authentication for the SMTP server.
• Items in the [POP before SMTP] column: Configure the POP server. Check
your mailing environment, and then specify the necessary items. You can
also perform mail authentication for the POP server.
• Items in the [POP3/IMAP4] column: Configure the POP3 or IMAP4 server.
Check your mailing environment, and then specify the necessary items.
• Items in the [E-mail Communication Port] column: Configure the port to be
used for access to the mail server.
• Items in the [E-mail Notification Account] column: Specify these items if you
want to use on-demand e-mail notification.
G
Click [OK].
Printer Status Notification by E-Mail
6
211