Ricoh Aficio SP W2470 Software Manual page 264

Monitoring and Configuring the Printer
keyphrase "phrase"
val {1|2|3|4}
encval {1|2|3|4}
rate [au-
to|11m|5.5m|2m|1m]
6
security
{none|wep|wpa}
wpaenc
wpaauth {wpapsk |
wpa}
psk "character
string"
250
Parameter
You can specify the WEP key when entering in ASCII.
With a 64-bit WEP, you can use 10 digit hexadecimals.
With a 128-bit WEP, you can use 26 digit hexadecimals.
Up to four WEP keys can be registered. Specify the num-
ber to be registered with "val".
When a WEP is specified by key phrase, the WEP speci-
fied by key is overwritten.
To use this function, set the same key number and WEP
key for all ports that transmit data to each other.
You can omit the numbers with "val". The key number is
set to 1 when making these omissions.
You can set an authorization mode when using WEP. The
specified value and authorized mode are as follows:
open: open system authorized (default)
shared: shared key authorized rate
You can set the IEEE 802.11b transmitting speed.
The speed you specify here is the speed at which data is
sent. You can receive data at any speed.
auto: automatically set (default)
11m: 11 Mbps fixed
5.5m: 5.5 Mbps fixed
2m:2 Mbps fixed
1m: 1 Mbps fixed
You can specify the security mode.
none: No encryption(default)S
wep: WEP encryption
wpa: WPA encryption
You can specify WPA encryption key when using WPA
{tkip|ccmp}
encryption.
tkip: TKIP (default)
ccmp: CCMP (AES)
You can specify the WPA authentication mode when us-
ing WPA encryption.
wpapsk: WPA-PSK authentication(default)
wpa: WPA(802.1X) authentication
You can specify the Pre-Shared key.
Usable characters: ASCII 0x20-0x7e (8 to 63 bytes).
The default is blank.
Value configured