Ricoh Aficio SP W2470 Software Manual page 283

Message
dhcpcd start
Duplicate IP= <IP address>(from <MAC ad-
dress>).
Established SPX Connection with PServer,
(RPSocket= <socketnumber>, connID= <con-
nection ID>)
exiting
Exit pserver
Frametype = <frame typename>
httpd start.
IEEE 802.11b <communication mode> mode
inetd start.
Interface (interface name): Duplicate IP Ad-
dress (IP address).
<Interface> started with IP: <IP address>
<Interface>: Subnet overlap.
IPP cancel-job: permission denied.
IPP job canceled. jobid=%d.
LeaseTime= <lease time>(sec), RenewTime=
<renewtime>(sec).
Login to fileserver <file server name>
(<IPX|IPv4|IPv6>, <NDS|BINDERY>)
Memory allocate error.
Name registration success. WINS Server=
<WINS server address> NetBIOS Name=
<NetBIOS name>
Name registration success in Broadcast name=
<NetBIOS Name>
Problem and solutions
The DHCPCD service (dhcp client service) has
started.
The same IP address (IPv4, or IPv6 address)
was used. Each IP address (IPv4, or IPv6 ad-
dress) must be unique. Check the address of
the device indicated in [MAC address].
(In the remote printer mode) Connection to the
print server has been established.
The lpd service has ended and the system is
exiting the process.
(In the print server mode) The print server
function is disabled because the necessary
print server settings have not been made.
The frame type name is configured to be used
on NetWare.
The httpd service has started.
Displays IEEE 802.11b communication mode.
The inetd service has started.
The same IP (IPv4 or IPv6) address was used.
Each IP address must be unique. Check the ad-
dress of the device indicated in [IP address].
IP address (IPv4, or IPv4 address) has been set
for the interface and is operating.
The same IP address (IPv4, or IPv6 address)
and the subnet mask is used with other device.
The printer could not authenticate the name of
the user attempting to cancel a job.
The spooled job was canceled due to error or
user request.
The resource lease time received from the
DHCP server is displayed in [lease time] in sec-
onds. The renewal time is displayed in [renew
time] in seconds.
(In the print server mode) Login to the file
server is in the NDS or BINDERY mode.
Data cannot be obtained.
Disconnect the USB cable, and then connect it.
Name registration of <NetBIOS Name> to
<WINS server address> was successful.
Name registration by Broadcast name of <Net-
BIOS Name> was successful.
Message List
6
269