Specifying An Ip Address (No Dhcp) - Ricoh Aficio SP W2470 Hardware Manual

Configuration

Specifying an IP Address (No DHCP)

Follow this procedure to assign a specific IP address to the printer. This is only
necessary when you will use the printer on a network without DHCP, or want
to prevent the printer's IP address from changing.
Before beginning, make sure that you know the IP address, subnet mask and
gateway address that the printer will use.
A
Press the {Menu} key.
4
B
Press the {U} or {T} key to select [Host Interface], and then press the {OK} key.
C
Press the {U} or {T} key to select [Network], and then press the {OK} key.
D
Press the {U} or {T} key to select [Effective Protocol], and then press the {OK}
key.
40
BAL051S