Ricoh Aficio SP W2470 Hardware Manual page 52

Configuration
J
Press the {U} or {T} key to enter the address, and then press the {OK} key.
• Press the {U} or {T} key to enter the left-most entry field of the address.
After entering the left field, press the {V} key, and then you can enter the
next field.
• After completing entry of the all fields, press the {OK} key.
• Use the same method to assign the subnet mask and gateway address.
• Change the IP address from "011.022.033.044" to an IP address supported
4
by your network.
K
Press the {U} or {T} key to select [Specify], and then press the {OK} key.
If you do not select [Specify] in this step, the address you set will not be saved.
L
Press the {Menu} key.
The initial screen appears.
M
Print a configuration page to confirm the settings.
Note
❒ For details about printing the configuration page, see p.31 "Test Printing".
42