Setting Items Of Wpa/Wpa2 - Ricoh Aficio SP W2470 Hardware Manual

Note
❒ If you request two certificates simultaneously, the certificate authority
might not display either certificate. Click [Cancel Request] to cancel the re-
quest.
❒ You can select [Certificate 1] and [Certificate 2] in the "Device Certificate"
window. Note that if you select [Certificate 1] in the "Device Certificate"
window, you must select "Certificate 1" in the "IEEE802.11b" drop down
menu in the "Certification" window.
❒ Click [Cancel Request] to cancel the request for the server certificate.
❒ If "Not found" appears after clicking [OK] in steps 9 and 17, wait one or two
minutes, and then click [Refresh].

Setting Items of WPA/WPA2

A
Start your Web browser.
B
Log on to Web Image Monitor in the administrator mode.
C
Click [Configuration], and then click [Wireless LAN Settings] in "Interface".
D
Select [Infrastructure Mode] in "Communication Mode".
E
Enter the alphanumeric characters (a-z, A-Z, or 0-9) in "SSID" according to
the access point you want to use.
F
Select [WPA] in "Security Type".
G
Select [TKIP] or [CCMP(AES)] in "WPA Encryption Method" according to the
access point you want to use.
H
Select [WPA] or [WPA2] in "WPA Authentication Method".
I
In "User Name", enter the user name set in the RADIUS server.
J
Enter the domain name in "Domain Name".
K
Select "EAP Type". Configurations differ according to the EAP Type.
EAP-TLS:
• Select the certificate you want to use in "WPA Client Certificate".
Make the following settings according to the operating system you are us-
ing:
• Select [On] or [Off] in "Authenticate Server Certificate".
• Select [On] or [Off] in "Trust Intermediate Certificate Authority".
• Enter the host name of the RADIUS server on "Server ID".
Configuring WPA/WPA2
4
63