Configuring Wpa/Wpa2 - Ricoh Aficio SP W2470 Hardware Manual

Configuration

Configuring WPA/WPA2

WPA/WPA2 uses an authentication server to provide greatly enhanced security
compared to WPA-PSK/WPA2-PSK.
WPA/WPA2 can be configured using Web Image Monitor's administrator
mode.
You can select four types of EAP authentication method: EAP-TLS, LEAP, EAP-
TTLS, and PEAP. Note that each EAP authentication method has different con-
figuration settings and authentication procedures.
Types and requirements of certificates are as follows:
If a certificate is required, configure all settings after installing the certificate.
❖ EAP Types Requiring a "Site Certificate"
4
EAP-TLS, EAP-TTLS, PEAP (Necessary except LEAP)
❖ EAP Types Requiring a "Site Certificate" and/or a "Device Certificate"
EAP-TLS, PEAP (Phase 2 is for TLS only)
Important
❒ To set WPA/WPA2, you must enable SSL. For details about setting SSL con-
figuration.
❒ To set WPA/WPA2, you must use Web Image Monitor.
Note
❒ For details, see "Protection Using Encryption" and "Using Web Image Mon-
itor", Software Guide.
60