Exterior: Front View
This section explains names and functions of the parts on the front and left side
of the printer.
1.
Upper output stacker
When the upper output is selected, out-
put paper is stacked here.
2.
Ventilation holes
Prevent overheating.
3.
Main unit
Open when paper jam or toner runs out.
4.
Main unit opening lever
Use to open the main unit.
5.
Power switch
Switches the power of the printer to On
or Stand by mode.
1. Guide to the Printer
6.
Paper roll tray (Tray 1 and 2)
Load a paper roll here.
7.
Control panel
See p.6 "Control Panel".
8.
Main unit front cover
Open when toner runs out.
9.
Bypass tray
Use to feed paper in manually. Load pa-
per print side up.
10.
Bypass tray's paper guide
Set to the width of the paper for bypass
printing.
BAL007S
1