Ricoh Aficio SP W2470 Hardware Manual page 51

E
Press the {U} or {T} key to select the appropriate network protocol, and
then press the {OK} key.
F
Press the {U} or {T} key to select [Active] or [Inactive], and then press the
{OK} key.
Set other protocols you need to set in the same way.
• Select [Inactive] for unused protocols.
• Enable IPv4 to use the pure IPv4 environment of NetWare 5/5.1, NetWare
6/6.5.
G
Press the {Escape} key until the screen returns to the [Network] menu.
H
If you use IPv4, assign the IPv4 address to the printer. Press the {U} or {T}
key to select [Machine IPv4 Address], and then press the {OK} key.
To get the IP address for the printer, contact your network administrator.
I
To specify the IP Address, press [IP Add.].
If you use IPv4, also assign subnet mask and gateway address. To assign
these, press [Subnet M] or [Gateway].
Ethernet Configuration
41
4