Remote Setup; Remote Upgrade - Vitek VT-CN1680 Manual

CHRONO Series DVR
Click on Callback tab to enter Callback setup menu.
Please set network ports (1500~32000, default: 10110) for Callback function.

4-2. Remote Setup

Click to enter remote set up menu.
Single connection (single site): please get a site connected for monitoring first, and click Button.
Favorite connection (multi sites): please click camera or site on the monitoring screen, and click button.
Note : The remote software provides an interactive setup system that allows easy setup of local DVR settings from remote sites. It
gets exactly same menu and options as the local system. Therefore please refer to "Chapter 3-2. DVR Configuration" and following
chapters for the detailed information.

4-3. Remote Upgrade

The system upgrade can be done through REM program on PC.
• Select and connect a site for system upgrade
• Click button to get to the setup menu and select Information under System
• Click Upgrade next to S/W version to find a file for upgrade
• Select the file location and the file to upgrade the system
Note : Please do not close down REM S/W or power off a computer until the system upgrade is completed.
53