Vitek VT-CN1680 Manual page 4

CHRONO Series DVR
• The product may not work properly if the power source is unstable or and if electric shock occurs. Make sure the correct rated
power is available.
• The product is designed to continue working despite electric power failures; however, damage may occur as a result of power
failure. Current data may be damaged or data might not be recorded. Make sure to use an Uninterruptible Power Supply (UPS).
• Since the product is designed to record video data on the hard disk, an error in the hard disk or other miscellaneous errors might
prevent the product from recording properly. Periodic maintenance is required for proper operation of the product.
• The product is designed for users to configure their own interface. However a user configuration error could lead to operation
malfunction. This product should be set up by certified installers only.
• Since the product is connected - and tightly coupled - to exterior accessories (camera, sensor, LAN, Hard Disk, etc.), there is a risk
of malfunction from external causes. Ensure periodic maintenance by the certified installers.
• Use the rack mounting handle provided with the product for installation.
• In this product, 1 Kbyte equals 1,024 bytes, 1 Mbyte equals 1,024,000 bytes and 1 Gbyte equals 1,024,000,000 bytes.
Requirements or limitations regarding operation. Users are
recommended to read the relevant details carefully so as
to operate the product properly and without harm.
3