Vitek VT-CN1680 Manual page 3

Chrono series 8 and 16 channel digital video recorders
Hide thumbs Also See for VT-CN1680:
Table of Contents

Advertisement

CHRONO Series DVR
types of power outlet, fire and electric shock may result.
• Do not expose the product to moisture and dampness. Doing so may result in fire and electric shock.
• Do not place heavy objects on top of the power cord. Damage to the power cord may result in fire and electric shock.
• Do not place containers with liquid or small metal objects on top of the product. Liquid or small metal objects getting into the unit
may lead to fire and electric shock.
• Do not score, bend, twist, pull or heat the power cord. Damage to the power cord may lead to fire and electric shock.
• Do not remove the top casing of the product. Doing so may result in electric shock. If internal examination and maintenance are
deemed necessary, contact the authorized system vendors or installers.
• Do not modify the product in any way. Doing so may lead to fire and electric shock.
• In case of lightning, immediately turn off the power switch and remove the power cord from the power outlet. Failure to do so
may result in fire and electric shock.
• Please use only the power cord supplied with the product. Use of other power cords may result in fire and electric shock.
• In case of smoke, smell or noise, immediately turn off the power switch and remove the power cord from the power outlet.
Continued operation of the product may result in fire and electric shock. Request a maintenance service from the authorized system
vendors or installers.
• If the product is dropped or damaged, turn off the power switch and remove the power cord from the power outlet. Continued
operation of the product may result in fire and electric shock. Users should request a maintenance service from the authorized
system vendors or installers.
• Do not touch the product with wet hands. Doing so may result in electric shock.
• Do not leave the power cord or other cables in passageways. Passers-by may trip and fall.
• Avoid contact with water or beverages. Contact with water or beverages may result in damage that cannot be repaired.
• In case of lightning, immediately turn off the power switch and remove the power cord from the power outlet. The product may
otherwise be damaged.
• Excessive current from the product and the camera may result in an electric shock. Connect the power cord to an external device
only when the products themselves are disconnected from their power supply.
• If a foreign substance is stuck to the product, remove it using a soft cloth or tissue. Do not use chemical agents (thinner, solvent,
etc.) to remove the substance.
• Do not operate or store the product in the following places:
- An area that is either too cold or too hot
- An area of high humidity, in front of an air-conditioner, or in places subject to sudden temperature changes
- An area where there is excessive dust
- Areas where heat from the product cannot be emitted through both of the product's side ventilation openings
• Do not place credit cards/telephone cards/bank account books/tickets and other objects with magnetic properties near the product.
• Static electricity may cause damage to the internal parts of the product. Please remove static electricity from your body before
touching the rear panel and internal electronic parts of the product.
• If this product is damaged beyond repair or reaches its maximum service life, dispose of it in compliance with local laws and
regulations regarding the disposal of lead and plastic waste.
Risk of serious or lesser degree of injury.
May also cause damage to the product or to property.
Risk of minor injury or damage.
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vt-cn840

Table of Contents