CHRONO Series DVR
2. Using the remote software
2-1. Starting the Software
Double click on 'REM' icon on PC to run the software.
Main screen of the remote software appears as shown below.
The location of icons and buttons may vary
depending on the product model or software
versions.
Connect
Playback Control
Disconnect Setup
Live: Click the image to enter the live mode
Playback: Click the image to enter the playback mode
Display Mode: Select display modes (single screen, 4, 9, 16, 25, 36, 49, 64 and full screen)
Save to Image: Save the recorded data in Image file format
Save to AVI: Save the recorded data in AVI file format
Save to Backup: Backup the recorded data
Connect / Disconnect: Click button for site setup and connect
Setup: Click button for remote software setup
Display Mode
Change Display
Page
Save to Image
Audio Volume
Voice Transmission
Save to Backup
Storage Selection
43
Close
Live
Playback
Save to AVI