Network; 2-­-5-­-1.   Menu   >   Network   >   Address; 2-­-5-­-2.   Menu   >   Network   >   Ddns - Vitek VT-CN1680 Manual

Chrono series 8 and 16 channel digital video recorders
Hide thumbs Also See for VT-CN1680:
Table of Contents

Advertisement

CHRONO Series DVR
Note : approximate size for each resolution – CIF: 360X240, Half D1: 720x240, D1: 720x480

2-5. NETWORK

Under Network menu, Network configuration options for network Address, DDNS, Remote Notification and Transmission can be set up.
2-5-1. MENU > NETWORK > Address
In Address, Information such as Type, IP address, Subnet Mask, Gateway Port and DNS can be set for network connections.
Type: Select the type of network configuration from: Static IP, DHCP and ADSL (with PPPoE).
IP Address: Enter IP address using
Subnet Mask: Enter Subnet Mask using
Gateway: Enter Gateway using
DNS: Set up the IP address of the DNS server. If you set up the DNS Server, the domain name of the DVRNS server instead of the
IP address can be used during the DVRNS Server setup.
In Port, Select appropriate port number for external access to the system.
The port list shows necessary ports to be opened for each operation.
Note : ID and Password are required in ADSL (with PPPoE) type.
Note : Default TCP port is 10101 but it can be set from 1500 to 32000 if necessary.
2-5-2. MENU > NETWORK > DDNS
In Recording Status, current recording options and status are displayed.
button.
button.
button.
In the DDNS, network options for DDNS can be selected.
DDNS: Dynamic Domain Name Server allows dynamic network connections.
Note : "dvr-ddns.com" and "www.dyndns.org" offer free registrations for DDNS service.
Please refer to the appendix for DDNS set up page.
Host Name: Name the DVR or site where it is located using the virtual keyboard by
pressing
.
ID/Password: ID and Password are required for Authentication.
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vt-cn840

Table of Contents