Table of Contents
Advertisement
Quick Links
FEATURES
• Full 8 MegaPixel [4K] Real-time recording (240fps) with 240fps playback
• 4K HDMI & VGA Video Outputs
• H.265+ / H.265 / H.264 Video Compression
• Plug and Play & Auto Configuration for Leading ONVIF Compliant IP Cameras
• Temperature Measurement [F / C], w/ Real-time and Historical Statistics
• Real-time Face Capture and Temp. Measurement Display
• Real-time Alarm for Abnormal Temp. and Mask Detection
• Real-time Personnel Info. Display (Name, Area, Temp., Mask On / Off,
Company)
• Supports Facial Recognition (w/ or w/out Masks): 8 Channels, 20,000 Picture
Database (4 Groups: Attendance Group / Allow / Block / VIP)
• Features Facial Search-by-Picture by Temperature, Time, Camera, Event, and
Mask, with Ability to Add Pictures through App, Web, and External Import
• Allow / Block / VIP / Temperature Exception Alarm
• Attendance Management by Week / Month / Custom
• Face Greeting View and Settings via Web Client
• Access Control Trigger by Staff / VIP / Allow List
• Alarm Modes: Motion /Sensor Detection, A.I. Event, Temp., Exception Alarm,
Mask
• Alarm Linkage: Record, PTZ, Cruise, Alarm Out, Pop-up Window, Email,
Buzzer, App Push
• Internal 8-Port PoE Switch
• 1 Gigabit LAN Port
• Pentaplex: Live Display / Record / Playback / Backup / Remote Access
• 1 Internal SATA2/SATA3 HDD Slot supporting up to 10TB (1 x 10TB HDD)
• Control locally via USB Mouse (Included) or IR Remote control (Optional)
• 2-Year Warranty
VT-TNR818TPH
8 Channel 8 MegaPixel [4K] Real
Time PoE Advanced A.I. Network
Temperature Measurement
PLEASE NOTE:
Complete User Guide, Software, Tools, and Updates are
available online. Scan the QR Code or visit:
http://www.vitekcctv.com/Downloads
Video Recorder with
Advertisement
Table of Contents
Related Manuals for Vitek TRANSCENDENT VT-TNR818TPH
Summary of Contents for Vitek TRANSCENDENT VT-TNR818TPH
- Page 1 VT-TNR818TPH 8 Channel 8 MegaPixel [4K] Real Time PoE Advanced A.I. Network Video Recorder with Temperature Measurement FEATURES • Full 8 MegaPixel [4K] Real-time recording (240fps) with 240fps playback • 4K HDMI & VGA Video Outputs • H.265+ / H.265 / H.264 Video Compression •...
-
Page 2: Hdd Installation
• This device should be operated only from the type of power source indicated on the label. Also, verify the voltage. • PLEASE CHECK the device and accessories upon purchase. If there is any damage, shortages or defects, please contact your VITEK Reseller immediately. HDD INSTALLATION • This Network Video Recorder supports 1 SATA hard drive. -
Page 3: Startup And Shutdown
START-UP AND SHUTDOWN ► Startup ① Connect the monitor and the power. ② The device will boot and the power indicator will display in blue. ③ A wizard window will pop up. ► Shutdown Click “Start” and select the “Shutdown” icon. This will bring up a shutdown window. The device will shut down by clicking the “OK”... -
Page 4: Disk Settings
DISK SETTINGS You can view the disk number, Disk capacity of the NVR and Serial Number, Read/Write status of the disk. Click “Format” to format the disk. Click “Next” to continue. NETWORK CONFIGURATION & ADDING DEVICES ① Enter IP address, subnet mask, gateway. If using DHCP, please enable DHCP in both the NVR and the router. -
Page 5: Record Settings
RECORD SETTINGS Two Record Modes: Auto and Manual. Auto Mode: Select one Auto Mode in the interface as shown below and then click “Next” to save the settings. Click “Advanced” to define a record mode. Manual: Set the “Sensor Record”, “Motion Record”, “Analytics Record” and “Schedule Record”... -
Page 6: Add Cameras
ADD CAMERAS Click Start→Settings→Camera to go to the “Edit Camera” interface. Click “Add” to add cameras. Select an IP camera / panel and then choose the terminal type as needed. Enter the device name and password and click “Add” to add devices. IP Panel: Four terminal types can be selected. -
Page 7: Live Display
Multiple face pictures can be added from “External faces” too. Put pictures and the file of personal information under the same directory of your mobile storage device. Select this directory and click “Full Entry” to add. Edit the file as follows: Note: Currently, only when the face picture is added to the face database and successfully matched by the IP Panel, can the Smart Management Terminal (SMT) show the temperature and picture of the person. - Page 8 ATTENDANCE SETTINGS AND SEARCH 1. Click Start→Attendance→Rule Settings to go to the rule setting interface. Set the working start and end time, “Late” and “leave early” rules, working day and holiday. Click a date on the calendar to switch between working day and holiday.
- Page 9 Detailed Specifications VT-TNR818TPH Video Input 8 IP Channels up to 8 MegaPixel / IP Panel Input Resolution 8MP/ 6MP/5MP/4MP/3MP/1080P/1280×1024/960P/720P/960H/D1/CIF Main Monitor Output HDMI x 1: 3840 x 2160 (@60fps) / 3840 x 2160 (@30fps) / 1920 x 1080 / 1280 x 1024 / 1024 x 768, VGA x 1: 1920 x 1080 / 1280 x 1024 / 1024 x 768 Multi Operation Pentaplex: Live Disp./Record/Playback/Backup/Remote Access...
- Page 10 ALSO CONSIDER THESE OTHER GREAT TRANSCENDENT THERMAL AND TEMP. SCREENING IP PRODUCTS! VT-TSP8: Transcendent Series 2 MP Temperature Screening Camera with 8-inch Display Panel Optional Desk/ Counter Mount Optional Wall Available. & Pole Mounts Available. VT-TNB5TH: Transcendent Series 5 MegaPixel Bi-Spectrum Long-Range Thermal WDR IP Motorized Bullet Camera, w/ VT-BB501 Blackbody Temperature Calibration Device (sold separately)
- Page 11 Also Consider Vitek Wireless Access Points to Reduce Costly Cable Installation! VT-WAP1150 and VT-WAP2150 High Speed 5.8GHz DIP AP / CPE Wireless Bridge w/ 8MB Storage, 64MB RAM, 150MBps transmission, and Point-to-Multi-Point (P2MP) Topology With high speed transmission of 150Mbps and a wireless range of 3000ft.
-
Page 12: Limited Product Warranty
(2) years, or as otherwise stated above, from the date of purchase by the end user. This warranty is nontransferable and extends only to the original buyer or end user customer of a VITEK Authorized Reseller.