Network Accounting
Problem
I cannot use this feature on the
machine.
Xerox WorkCentre 4250/4260 Series System Administration Guide
Press the <Log In/Out> button on the machine to enter the
1.
Tools pathway.
Enter the Administrator's Password. The default is [1111].
2.
3.
Touch [Enter].
4.
Press the <Machine Status> button.
5.
Touch the [Tools] tab.
6.
Touch [Accounting].
7.
Touch [Accounting Enablement].
8.
Touch [Authentication Mode].
9.
Check that Network Accounting is enabled.
Test the communication between the Network Accounting Server and
the Xerox machine.
1.
At your Workstation, open the web browser, enter the IP
Address of the Xerox machine in the address field, and press
[Enter].
2.
The machine Internet Services web pages should appear. If it
does not, verify the IP Address settings on the machine. If you
do not have a web browser, test connectivity by pinging the IP
Address of the machine from your Network Accounting server.
3.
Verify that your Network Accounting server is configured
correctly. Consult the manufacturer's documentation with your
Network Accounting server to perform this task.
Network Accounting
Action
181