Unix - Xerox 4250 - WorkCentre - Copier System Administration Manual

8. Select the options as installed on your device.
NOTE:
to [Installed].
9. Click on the [Apply Changes] button.
10. Click on the [Close] button.
Printing Preferences
1. Printing Preferences contains all the driver features, and enables you to set default
settings for the driver. You may save multiple sets of settings, and select the
appropriate "Preset" at the time of printing.
2. Open a document and select [File], then [Print]. Select the printer, then select the
Preset you want to modify, or select [Standard].
3. Options are available under the following dialogs:
•
•
•
•
•
•
•
•
•
•
•
4. A summary of settings is shown under Summary. When you have set the options you
require, select [File] and [Save As], and enter a name for the Preset.
5. You may save multiple Presets with differing combinations of settings.
6. For detailed information on the printer driver options please refer to the CentreWare
Printer Drivers Guide for Macintosh located on the CentreWare Print and Fax Drivers
CD delivered with your device.

UNIX

Unix printer drivers are located on the CentreWare Print and Fax Drivers CD delivered with
your device. Refer to the documentation contained on the CD for further instructions.
Xerox WorkCentre 4250/4260 Series System Administration Guide
If you want to use the Save Job for Reprint feature, ensure Job Storage is set
Copies & Pages - Specify which pages to print, and how many copies.
Layout - Specify sides to print, page borders, pages per sheet (N-up).
Output Options - Save as PDF or PostScript file.
Scheduler - Print now, hold, or specify a time to print.
Paper Handling - Print all pages, only odd pages, or only even pages. Reverse the
page order.
Color Sync - Specify colour conversion and quartz filters.
Cover Page - Printed before or after the job, or no Cover Page.
Error Handling - Standard or detailed report.
Paper Feed - Specify which trays are used for which pages.
Accounting - If you have an Accounting feature such as Xerox Standard
Accounting or Network Accounting installed, you can enable Accounting in the
driver. For further information refer to the relevant Accounting feature in the
System Administration CD1.
Xerox Features - Job type (e.g. saved job or fax), 2 sided, output destination.
Apple Mac
53