Access The Authentication Page; Configure Xerox Secure Access - Xerox 4250 - WorkCentre - Copier System Administration Manual

Access the Authentication Page

To access the [Authentication] Page:
1. Open your web browser and enter the TCP/IP address of the device in the Address
bar. Press [Enter].
2. Click the [Properties] tab.
3. If prompted, enter the User ID and Password of the device administrator account.
The default is [admin] and [1111]. Click [Login].
4. Click [Security].
5. Click [Authentication].

Configure Xerox Secure Access

To configure Secure Access on the device, on the [Authentication] Page:
1. Select [Required Network Authentication].
2. In [Authentication Type], select [Xerox Secure Access].
In [Feature Coverage], select the desired feature coverage. The options include:
3.
•
•
In [Accounting Code Access], if you want the Secure Access Server to provide
4.
Network Accounting Codes, select [Enable].
5. In [Login Initiation], if you want to allow users to enter their information via the
local user interface, select [Enable].
This feature may be helpful in situations where the user's card is not available or when
the card reader is not used.
In [Default Title], enter a title that will display on the Xerox device screen.
6.
7. In [Default Prompt], specify the prompt that will show on the Xerox device screen to
tell the user what they need to do to be authenticated at the device.
NOTE:
Server, then this information will overwrite the [Default Title] and [Default Prompt]
text entered within Internet Services.
8. Click [Apply].
Xerox WorkCentre 4250/4260 Series System Administration Guide
All features — authentication must be performed to access all of the device
services.
Scanning features only — the supported services, such as copy and fax, will not
require authentication.
If the Title and Prompt have been configured in the Xerox Secure Access
Configure Xerox Secure Access on the Device
157