Dynamic Addressing; Linux Lpr Via Printtool; Static Addressing - Xerox 4250 - WorkCentre - Copier System Administration Manual

18. Click on [Continue].
19. The Printer Added Successfully message will appear.

Dynamic Addressing

Information Checklist
See Chapter 3, Configure Dynamic IPv4 Addressing using the Machine User Interface,
Information Checklist on page 15.
Procedure
1. Follow the steps in Chapter 3, Configure Dynamic IPv4 Addressing using the Machine
User Interface, Procedure on page 16 until step 38, then return to this page.
IMPORTANT: Click on [BOOTP] in step 9.
Create the Print Queue
2. Follow the steps above in Create the Print Queue on page 29.

Linux LPR via PrintTool

Static Addressing

Information Checklist
Before starting the Installation procedure, please ensure that the following items are
available and/or the tasks have been performed:
1. See Chapter 3, Configure Static IPv4 Addressing using the Machine User Interface,
Information Checklist on page 13.
2. Linux operating system that supports PrintTool.
NOTE:
Procedure
1. Follow the steps in Chapter 3, Configure Static IPv4 Addressing using the Machine
User Interface, Procedure on page 14 until step 38, then return to this page.
Create the Print Queue
2. Log in, at the Linux Client, as root in a terminal.
3. Enter printtool.
4. The Red Hat Linux Print System Manager will launch.
5. Click on the [Add].
6. The [Add a Printer Entry] window will appear.
Xerox WorkCentre 4250/4260 Series System Administration Guide
Not all distros of Linux support PrintTool.
Unix
29