Panel And Interface Leds; Interface Cable; Figure 7-6 1Fe Module Panel; Figure 7-7 2Fe Module Panel - H3C SECPATH F100-A,SECPATH F100-A HOST,A Installation Manual

Installation Manual
H3C SecPath F100-A Firewall

7.4.4 Panel and Interface LEDs

Figure 7-6 shows the 1FE module panel.

Figure 7-6 1FE module panel

Figure 7-7 shows the 2FE module panel.

Figure 7-7 2FE module panel

Figure 7-8 shows the 2FE module panel.

Figure 7-8 4FE module panel

Table 7-2 describes the LEDs on the 1FE/2FE/4FE module panel and how to read their
state.

Table 7-2 LEDs on the 1FE/2FE/4FE module

LINK
ACTIVE

7.4.5 Interface Cable

I. Ethernet cable
The FE modules use category-5 twisted-pair cables with RJ-45 connectors (see Figure
7-9). Pins 1 and 2 of the connectors are for transmitting data, and Pins 3 and 6 are for
receiving data.
10/100BASE-TX
0
LED
7-5
Chapter 7 MIM Modules
1
Description
OFF means no link is present; ON
means a link is present.
OFF means no packets are being
transmitted/received on the interface;
blinking means packets are being
transmitted/received on the interface.